diff -Naur wfdb-10.3.3/Makefile wfdb-10.3.4/Makefile
--- wfdb-10.3.3/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/Makefile	Sun Mar 30 14:43:53 2003
@@ -39,12 +39,12 @@
 # create source archives, type `make tarballs';  or to make a binary archive,
 # type `make bin-tarball'.  Making archives requires PGP, gzip, and GNU tar).
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -61,8 +61,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/NEWS wfdb-10.3.4/NEWS
--- wfdb-10.3.3/NEWS	Wed Mar 19 12:10:21 2003
+++ wfdb-10.3.4/NEWS	Sun Mar 30 14:30:24 2003
@@ -1,3 +1,9 @@
+10.3.4:
+	xform now handles input and output sampling frequencies that are not
+	exact multiples of 1 Hz.
+
+	Added SRCDIR definition in configure and conf/cygwin.def.
+
 10.3.3:
 	Fixed man page installation bug;  thanks to Joe Mietus for the bug
 	report.
diff -Naur wfdb-10.3.3/README.NETFILES wfdb-10.3.4/README.NETFILES
--- wfdb-10.3.3/README.NETFILES	Fri Jun 21 22:54:12 2002
+++ wfdb-10.3.4/README.NETFILES	Sun Mar 30 14:25:30 2003
@@ -32,7 +32,7 @@
 
 	rdsamp -r mitdb/100 -t .1     (MIT-BIH Arrhythmia Database, record 100)
 	rdann -r slpdb/slp67x -a st   (MIT-BIH Polysomnographic Database,
-				       record slp67x
+				       record slp67x)
 	wave -r mimicdb/237/237	-a al (MIMIC Database, record 237 -- note that
 				       since each MIMIC record is kept in its
 				       own subdirectory of mimicdb, two levels
diff -Naur wfdb-10.3.3/app/Makefile wfdb-10.3.4/app/Makefile
--- wfdb-10.3.3/app/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/app/Makefile	Sun Mar 30 14:43:53 2003
@@ -33,12 +33,12 @@
 # type `make listing'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -55,8 +55,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/app/xform.c wfdb-10.3.4/app/xform.c
--- wfdb-10.3.3/app/xform.c	Thu Feb 13 13:23:49 2003
+++ wfdb-10.3.4/app/xform.c	Wed Mar 26 15:30:07 2003
@@ -1,9 +1,9 @@
 /* file: xform.c	G. Moody        8 December 1983
-			Last revised:  14 November 2002
+			Last revised:    26 March 2003
 
 -------------------------------------------------------------------------------
 xform: Sampling frequency, amplitude, and format conversion for WFDB records
-Copyright (C) 2002 George B. Moody
+Copyright (C) 2003 George B. Moody
 
 This program is free software; you can redistribute it and/or modify it under
 the terms of the GNU General Public License as published by the Free Software
@@ -29,7 +29,7 @@
 #include <wfdb/wfdb.h>
 
 char *pname, *prog_name();
-int gcd();
+double gcd();
 void help();
 
 main(argc, argv)
@@ -38,10 +38,10 @@
 {
     char btstring[30], **description, **filename, *irec = NULL, *orec = NULL,
 	*nrec = NULL, *script = NULL, *startp = "0:0", **units;
-    double *gain;
+    double *gain, ifreq, ofreq = 0.0;
     int clip = 0, *deltav, fflag = 0, gflag = 0, Hflag = 0, i, iframelen,
-	ifreq, j, m, Mflag = 0, mn, *msiglist, n, nann = 0, nisig,
-	nminutes = 0, nosig = 0, oframelen, ofreq = 0, reopen = 0, sflag = 0,
+	j, m, Mflag = 0, mn, *msiglist, n, nann = 0, nisig,
+	nminutes = 0, nosig = 0, oframelen, reopen = 0, sflag = 0,
 	*siglist = NULL, spf, uflag = 0, use_irec_desc = 1, *v, *vin, *vmax,
 	*vmin, *vout, *vv;
     long from = 0L, it = 0L, nsamp = -1L, nsm = 0L, ot = 0L, spm, to = 0L;
@@ -262,7 +262,7 @@
     if (Hflag)
 	setgvmode(WFDB_HIGHRES);
     spf = getspf();
-    ifreq = strtim("1") * spf;
+    ifreq = sampfreq(NULL) * spf;
     (void)setsampfreq(0.);
 
     if (isigopen(irec, dfin, nisig) != nisig) exit(2);
@@ -344,16 +344,16 @@
 	if (Mflag) {
 	    ofreq = ifreq;
 	    (void)fprintf(stderr,
-		  "Sampling frequency (%d frames/sec) will be unchanged\n",
+		  "Sampling frequency (%g frames/sec) will be unchanged\n",
 			  ofreq);
 	}
 	else do {
 	    ofreq = ifreq;
 	    (void)fprintf(stderr,
-		  "Output sampling frequency (Hz per signal, > 0) [%d]: ",
+		  "Output sampling frequency (Hz per signal, > 0) [%g]: ",
 			  ofreq);
 	    (void)fgets(answer, sizeof(answer), ttyin);
-	    (void)sscanf(answer, "%d", &ofreq);
+	    (void)sscanf(answer, "%g", &ofreq);
 	} while (ofreq < 0);
 	if (ofreq == 0) ofreq = WFDB_DEFFREQ;
 	if (nosig > 0) {
@@ -540,7 +540,7 @@
 	    cc = -129;
 	    while (getann((unsigned)i, &annot) == 0 &&
 		   (to == 0L || annot.time <= to)) {
-		annot.time = (annot.time - from) * ((double)ofreq*spf) / ifreq;
+		annot.time = (annot.time - from) * (ofreq*spf) / ifreq;
 		/* If the -u option was specified, make sure that the corrected
 		   annotation time is positive and that it is later than the
 		   previous annotation time (exception: if it matches the
@@ -695,10 +695,11 @@
     /* If resampling is required, initialize the interpolation/decimation
        parameters. */
     if (ifreq != ofreq) {
+	double f = gcd(ifreq, ofreq);
+
 	fflag = 1;
-	i = gcd(ifreq, ofreq);
-	m = ifreq/i;
-	n = ofreq/i;
+	m = ifreq/f;
+	n = ofreq/f;
 	mn = m*n;
 	(void)getvec(vin);
 	for (i = 0; i < nosig; i++) 
@@ -929,7 +930,7 @@
     if (nrec) {
 	char *info, *xinfo;
 
-	(void)setsampfreq((double)ofreq);
+	(void)setsampfreq(ofreq);
 	if (btstring[0] == '[') {
 	    btstring[strlen(btstring)-1] = '\0';  /* discard final ']' */
 	    (void)setbasetime(btstring+1);
@@ -971,14 +972,24 @@
     exit(0);	/*NOTREACHED*/
 }
 
-int gcd(x, y)	/* greatest common divisor of x and y (Euclid's algorithm) */
-int x, y;
+
+/* Calculate the greatest common divisor of x and y.  This function uses
+   Euclid's algorithm, modified so that an exact answer is not required if the
+   (possibly non-integral) arguments do not have a common divisor that can be
+   represented exactly. */
+double gcd(x, y)
+double x, y;
 {
-    while (x != y) {
-	if (x > y) x -= y;
-	else y -= x;
+    double tol;
+
+    if (x > y) tol = 0.001*y;
+    else tol = 0.001*x;
+
+    while (1) {
+	if (x > y && x-y > tol) x -= y;
+	else if (y > x && y-x > tol) y -= x;
+	else return (x);
     }
-    return (x);
 }
 
 char *prog_name(s)
diff -Naur wfdb-10.3.3/checkpkg/Makefile wfdb-10.3.4/checkpkg/Makefile
--- wfdb-10.3.3/checkpkg/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/checkpkg/Makefile	Sun Mar 30 14:43:53 2003
@@ -31,12 +31,12 @@
 # directory).  To print a set of source listings, type `make listing'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -53,8 +53,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/conf/cygwin.def wfdb-10.3.4/conf/cygwin.def
--- wfdb-10.3.3/conf/cygwin.def	Wed Mar 19 18:03:31 2003
+++ wfdb-10.3.4/conf/cygwin.def	Sun Mar 30 14:17:07 2003
@@ -1,5 +1,5 @@
 # file: cygwin.def		G. Moody	6 June 2000
-#				Last revised:  4 March 2003
+#				Last revised:  30 March 2003
 #
 # This file contains default 'make' definitions for compiling the WFDB Software
 # Package under MS Windows using the free Cygwin/gcc ANSI C compiler, available
@@ -145,12 +145,12 @@
 SETLPERMISSIONS = chmod 644
 
 # SETXPERMISSIONS is the command needed to make the applications accessible.
-SETXPERMISSIONS = chmod 755
+SETXPERMISSIONS = $(SRCDIR)/conf/exechmod 755
 
 # STRIP is the command used to compact the compiled binaries by removing their
 # symbol tables.  'exestrip' is a script that appends the '.exe' suffix to the
 # files in its argument list before passing their names to 'strip' itself.
-STRIP = ../conf/exestrip
+STRIP = $(SRCDIR)/conf/exestrip
 # To retain the symbol tables for debugging, comment out the previous line, and
 # uncomment the next line.
 # STRIP = :
diff -Naur wfdb-10.3.3/conf/version.def wfdb-10.3.4/conf/version.def
--- wfdb-10.3.3/conf/version.def	Wed Mar 19 12:09:16 2003
+++ wfdb-10.3.4/conf/version.def	Sun Mar 30 14:43:32 2003
@@ -1,10 +1,10 @@
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
diff -Naur wfdb-10.3.3/configure wfdb-10.3.4/configure
--- wfdb-10.3.3/configure	Wed Mar 19 13:48:24 2003
+++ wfdb-10.3.4/configure	Sun Mar 30 14:48:16 2003
@@ -1,6 +1,6 @@
 #! /bin/sh
 # file: configure             G. Moody         24 May 2000
-#                             Last revised:   19 March 2003
+#                             Last revised:   30 March 2003
 # Configuration script for the WFDB Software Package
 
 # This script was not generated using 'autoconf'.  If you can implement
@@ -49,69 +49,71 @@
 OS=`uname`
 echo "Configuring the WFDB software package for $OS."
 
+SRCDIR=`pwd`
+cd conf
+
 echo "Checking the echo command ..."
 echo -n >echo.out
 if [ -s echo.out ]
 then
-ln -sf prompt-c conf/prompt
+ln -sf prompt-c prompt
 else
-ln -sf prompt-n conf/prompt
+ln -sf prompt-n prompt
 fi
 rm echo.out
 
-cp conf/version.def conf/site.def
-
-echo "# Definitions generated by 'configure'" >>conf/site.def
-echo >>conf/site.def
-PWD=`pwd`
-PACKAGE=`basename $PWD`
-echo "PACKAGE = $PACKAGE" >>conf/site.def
-echo LONGDATE = `date '+%e %B %Y'` >>conf/site.def
-echo SHORTDATE = `date '+%B %Y' | tr a-z A-Z` >>conf/site.def
-echo "# _____________________________________________________________________________" >>conf/site.def
-echo >>conf/site.def
+PACKAGE=`basename $SRCDIR`
+cp version.def site.def
+echo "# Definitions generated by 'configure'" >>site.def
+echo >>site.def
+echo "PACKAGE = $PACKAGE" >>site.def
+echo "SRCDIR = $SRCDIR" >>site.def
+echo LONGDATE = `date '+%e %B %Y'` >>site.def
+echo SHORTDATE = `date '+%B %Y' | tr a-z A-Z` >>site.def
+echo "# _____________________________________________________________________________" >>site.def
+echo >>site.def
 
-cp /dev/null conf/site-slib.def
+cp /dev/null site-slib.def
 case `uname` in
   Linux*) OS=Linux
-    cat conf/linux.def >>conf/site.def
-    cat conf/version.def conf/linux-slib.def >conf/site-slib.def ;;
+    cat site.def linux-slib.def >site-slib.def
+    cat linux.def >>site.def ;;
   FreeBSD*) OS=FreeBSD
-    cat conf/freebsd.def >>conf/site.def
-    cat conf/version.def conf/freebsd-slib.def >conf/site-slib.def ;;
+    cat site.def freebsd-slib.def >site-slib.def
+    cat freebsd.def >>site.def ;;
   SunOS*) OS=Solaris
-    cat conf/solaris.def >>conf/site.def
-    cat conf/version.def conf/solaris-slib.def >conf/site-slib.def
+    cat site.def solaris-slib.def >site-slib.def
+    cat solaris.def >>site.def
     echo "It is normal, and harmless, for Solaris to be recognized as"
     echo "SunOS." ;;
   HP-UX*) OS=HPUX
-    cat conf/hpux.def >>conf/site.def
-    cat conf/version.def conf/hpux-slib.def >conf/site-slib.def ;;
+    cat site.def hpux-slib.def >site-slib.def
+    cat hpux.def >>site.def ;;
   CYGWIN*) OS=cygwin
-    cat conf/cygwin.def >>conf/site.def
-    cat conf/version.def conf/cygwin-slib.def >conf/site-slib.def ;;
+    cat site.def cygwin-slib.def >site-slib.def
+    cat cygwin.def >>site.def ;;
   Darwin*) OS=Darwin
     LIBTYPE=dynamic
-    cat conf/darwin.def >>conf/site.def
-    cat conf/version.def conf/darwin-slib.def > conf/site-slib.def
+    cat site.def darwin-slib.def >site-slib.def
+    cat darwin.def >>site.def
     echo "It is normal for Mac OS X to be recognized as Darwin."
     echo "Building static libraries is not supported on Darwin." ;;
   *)      OS=generic
-    cat conf/generic.def >>conf/site.def
-    cat conf/version.def conf/generic-slib.def >conf/site-slib.def
+    cat site.def generic-slib.def >site-slib.def
+    cat generic.def >>site.def
     echo "Using the generic configuration, which may need to be customized"
     echo "for your operating system.  'configure' will offer suggestions for"
     echo "customization after it completes the generic configuration." ;;
 esac
 
-if [ -s conf/site-slib.def ]
+if [ -s site-slib.def ]
 then
   if [ x$LIBTYPE = x ]
   then
     echo
     echo "The WFDB library may be compiled as a static library or as a"
     echo "dynamically loaded (shared) library (the default).  Type S for a"
-    conf/prompt "static library, or D for a dynamically loaded library:"
+    ./prompt "static library, or D for a dynamically loaded library:"
     read LIBTYPE
   fi
 else
@@ -119,7 +121,7 @@
 fi
 
 case x$LIBTYPE in
-  xS*|xs*) cp /dev/null conf/site-slib.def
+  xS*|xs*) cp /dev/null site-slib.def
            LIBTYPE=static ;;
         *) LIBTYPE=dynamic ;;
 esac
@@ -138,13 +140,12 @@
 	echo "libraries only may cause compilation to fail if your"
 	echo "system does not have a complete set of static libraries."
 	echo "Type S to link to static libraries only, or D to link to"
-	conf/prompt "dynamically loaded libraries where available:"
+	./prompt "dynamically loaded libraries where available:"
 	read SYSLIBS
     fi
     case x$SYSLIBS in
-        xS*|xs*) sed "s/LDFLAGS = -L/LDFLAGS = -static -L/" \
-		     <conf/site.def >conf/site.tmp
-		 mv conf/site.tmp conf/site.def
+        xS*|xs*) sed "s/LDFLAGS = -L/LDFLAGS = -static -L/" <site.def >site.tmp
+		 mv site.tmp site.def
 		 echo "Applications will be linked with static libraries only."
 		 SYSLIBS=static
 		 ;;
@@ -155,7 +156,7 @@
 fi
 
 echo
-conf/prompt "Looking for the C compiler ..."
+./prompt "Looking for the C compiler ..."
 WCC=`which gcc 2>&1`
 if [ "x$WCC" = "x" ]
 then
@@ -176,12 +177,13 @@
         echo "appear to be a C compiler installed on this system.  Please"
         echo "install one, be sure that it is in your PATH, and that it is"
 	echo "accessible as either 'cc' or 'gcc', then run ./configure again."
+	cd ..
 	exit
     else
-        sed "s/CC = gcc/CC = cc/" <conf/site.def >conf/site.tmp
-	mv conf/site.tmp conf/site.def
-        sed "s/CC = gcc/CC = cc/" <conf/site-slib.def >conf/site.tmp
-	mv conf/site.tmp conf/site-slib.def
+        sed "s/CC = gcc/CC = cc/" <site.def >site.tmp
+	mv site.tmp site.def
+        sed "s/CC = gcc/CC = cc/" <site-slib.def >site.tmp
+	mv site.tmp site-slib.def
 	CC=cc
     fi
 else
@@ -205,7 +207,7 @@
     DIR=
     while [ x$DIR = x ]
     do
-        conf/prompt "Choose a location, or press <Enter> to install in /usr:"
+        ./prompt "Choose a location, or press <Enter> to install in /usr:"
         read DIR
         case x$DIR in
             x/usr) ;;
@@ -221,16 +223,16 @@
 
 case $DIR in
   /usr) ;;
-    /*) sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <conf/site.def >conf/site.tmp
-        mv conf/site.tmp conf/site.def
-        sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <conf/site-slib.def \
-         >conf/site.tmp
-        mv conf/site.tmp conf/site-slib.def
+    /*) sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <site.def >site.tmp
+        mv site.tmp site.def
+        sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <site-slib.def \
+         >site.tmp
+        mv site.tmp site-slib.def
 esac
 
 echo  "The WFDB software will be installed in '$DIR'."
 
-MANTMP=`grep "MANDIR =" conf/site.def |sed 's+$(WFDBROOT)/++' |cut -d " " -f 3`
+MANTMP=`grep "MANDIR =" site.def |sed 's+$(WFDBROOT)/++' |cut -d " " -f 3`
 MANDEF=$DIR/$MANTMP
 if [ x$MANDIR = x ]
 then
@@ -243,10 +245,10 @@
     echo "but without a '/' at the end).  If the subdirectories (man1, man3,"
     echo "man5, ...) of MANDIR don't exist, they will be created as necessary."
     echo
-    DIR=
+    MANDIR=
     while [ x$MANDIR = x ]
     do
-       conf/prompt "Choose a location, or press <Enter> to install in $MANDEF:"
+       ./prompt "Choose a location, or press <Enter> to install in $MANDEF:"
         read MANDIR
         case x$MANDIR in
             x/usr) ;;
@@ -262,14 +264,14 @@
 
 if [ "$MANDIR" != "$MANDEF" ]
 then
-    sed "s+^MANDIR = $MANDEF+MANDIR = $MANDIR+" <conf/site.def >conf/site.tmp
-    mv conf/site.tmp conf/site.def
+    sed "s+^MANDIR = $MANDEF+MANDIR = $MANDIR+" <site.def >site.tmp
+    mv site.tmp site.def
 fi
 
 echo  "The manual pages will be installed in '$MANDIR'."
 
 echo
-conf/prompt "Looking for libwww ..."
+./prompt "Looking for libwww ..."
 WLC=`which libwww-config 2>&1`
 if [ "x$WLC" = "x" ]
 then
@@ -281,30 +283,31 @@
     echo "The WFDB software will be compiled without NETFILES access, because"
     echo "libwww does not appear to be installed on this system."
     echo "To add NETFILES access, install libwww and run ./configure again."
-    echo "NETFILES=0" >config.cache
-    sed "s/LWC = libwww-config/LWC = :/" <conf/site.def >conf/site.tmp
-    mv conf/site.tmp conf/site.def
-    sed "s/LWC = libwww-config/LWC = :/" <conf/site-slib.def >conf/site.tmp
-    mv conf/site.tmp conf/site-slib.def
-    sed "s/WFDB_NETFILES 1/WFDB_NETFILES 0/" <lib/wfdb.h0 >lib/wfdb.h
+    echo "NETFILES=0" >../config.cache
+    sed "s/LWC = libwww-config/LWC = :/" <site.def >site.tmp
+    mv site.tmp site.def
+    sed "s/LWC = libwww-config/LWC = :/" <site-slib.def >site.tmp
+    mv site.tmp site-slib.def
+    sed "s/WFDB_NETFILES 1/WFDB_NETFILES 0/" <../lib/wfdb.h0 >../lib/wfdb.h
     WITHNF=without
 else
     echo "found"
     echo "The WFDB software will be compiled with NETFILES access."
-    echo "NETFILES=1" >config.cache
-    sed "s/LWC = :/LWC = libwww-config/" <conf/site.def >conf/site.tmp
-    mv conf/site.tmp conf/site.def
+    echo "NETFILES=1" >../config.cache
+    sed "s/LWC = :/LWC = libwww-config/" <site.def >site.tmp
+    mv site.tmp site.def
     if [ $LIBTYPE = "static" ]
     then
-        sed "s/LDLIBWWW = #/LDLIBWWW =/" <conf/site.def >conf/site.tmp
-	mv conf/site.tmp conf/site.def
+        sed "s/LDLIBWWW = #/LDLIBWWW =/" <site.def >site.tmp
+	mv site.tmp site.def
     fi
-    sed "s/LWC = :/LWC = libwww-config/" <conf/site-slib.def >conf/site.tmp
-    mv conf/site.tmp conf/site-slib.def
-    sed "s/WFDB_NETFILES 0/WFDB_NETFILES 1/" <lib/wfdb.h0 >lib/wfdb.h
+    sed "s/LWC = :/LWC = libwww-config/" <site-slib.def >site.tmp
+    mv site.tmp site-slib.def
+    sed "s/WFDB_NETFILES 0/WFDB_NETFILES 1/" <../lib/wfdb.h0 >../lib/wfdb.h
     WITHNF=with
 fi
 
+cd ..
 echo
 echo "Creating Makefile in lib ..."
 if [ -s conf/site-slib.def ]
@@ -368,19 +371,19 @@
     echo "XView textedit application to your PATH, and run ./configure again."
     cp -p wave/nomake wave/Makefile
     cp -p wave/nomake waverc/Makefile
-    echo "WAVE=0" >>config.cache
+    echo "WAVE=0" >>../config.cache
     WAVECOMP="WAVE will not be compiled."
 else
     echo "found"
     WAVECOMP="WAVE will be compiled and installed in '$DIR/bin'."
-    echo "WAVE=1" >>config.cache
+    echo "WAVE=1" >>../config.cache
 fi
 
 # Clean up old *.o files in lib, to avoid possibly using binaries intended
 # for a shared library in a static library or vice versa.
 rm -f lib/*.o
 
-if [ $DIR != "/usr" -a $LIBTYPE = dynamic ]
+if [ $DIR != "/usr" -a  $LIBTYPE = dynamic ]
 then
     echo
     echo "IMPORTANT:  You have chosen to build a dynamic (shared) WFDB"
diff -Naur wfdb-10.3.3/convert/Makefile wfdb-10.3.4/convert/Makefile
--- wfdb-10.3.3/convert/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/convert/Makefile	Sun Mar 30 14:43:53 2003
@@ -33,12 +33,12 @@
 # type `make listing'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -55,8 +55,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/data/Makefile wfdb-10.3.4/data/Makefile
--- wfdb-10.3.3/data/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/data/Makefile	Sun Mar 30 14:43:53 2003
@@ -33,12 +33,12 @@
 # listing'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -55,8 +55,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/doc/Makefile wfdb-10.3.4/doc/Makefile
--- wfdb-10.3.3/doc/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/doc/Makefile	Sun Mar 30 14:43:53 2003
@@ -134,12 +134,12 @@
 #    `make ug'.  To print the WFDB Programmer's Guide, type `make pg'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -156,8 +156,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/doc/wag-src/Makefile wfdb-10.3.4/doc/wag-src/Makefile
--- wfdb-10.3.3/doc/wag-src/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/doc/wag-src/Makefile	Sun Mar 30 14:43:53 2003
@@ -59,12 +59,12 @@
 # PostScript	'make wag.ps'  (requires troff, tbl, latex, and dvips)
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -81,8 +81,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/doc/wag-src/xform.1 wfdb-10.3.4/doc/wag-src/xform.1
--- wfdb-10.3.3/doc/wag-src/xform.1	Thu Aug  1 01:53:37 2002
+++ wfdb-10.3.4/doc/wag-src/xform.1	Sun Mar 30 14:25:00 2003
@@ -1,4 +1,4 @@
-.TH XFORM 1 "1 August 2002" "WFDB 10.2.7" "WFDB Applications Guide"
+.TH XFORM 1 "30 March 2003" "WFDB 10.3.4" "WFDB Applications Guide"
 .SH NAME
 xform \- sampling frequency, amplitude, and format conversion for WFDB records
 .SH SYNOPSIS
@@ -87,24 +87,21 @@
 To process only a segment of the \fIinput-record\fR, specify the starting and
 ending times using the \fB-f\fR and \fB-t\fR options.
 .PP
-Sampling frequency changes are performed by linear
-interpolation;  any combination of input and output sampling frequencies
-is permissible, provided that both are integers (if non-integer sampling
-frequencies are specified, they are truncated to multiples of 1 Hz before
-the interpolation/decimation parameters are determined).
-This interpolation method has the advantage of being reasonably fast, an
-important consideration since it is often necessary to operate on a million
-or more samples.  Resampling noise is not a significant problem for the
-typical applications of \fBxform\fR (changing the sampling frequency by
-factors of five or less).  Aliasing can be a problem, however, when the input
-sampling frequency is greater than the output sampling frequency.  In such
-cases, if the input signals contain frequency components at or above half of
-the output sampling frequency, the input signals should be low-pass filtered
-(using, for example \fBfir\fR(1)) to remove these components before processing
-them with \fBxform\fR.  Conversely, if the output sampling frequency is
-substantially greater than the input sampling frequency, resampling noise
-introduced at frequencies in excess of half of the input sampling frequency
-can be removed by low-pass filtering the output signals.
+Sampling frequency changes are performed by linear interpolation; any
+combination of input and output sampling frequencies is permissible.  This
+interpolation method has the advantage of being reasonably fast, an important
+consideration since it is often necessary to operate on a million or more
+samples.  Resampling noise is not a significant problem for the typical
+applications of \fBxform\fR (changing the sampling frequency by factors of five
+or less).  Aliasing can be a problem, however, when the input sampling
+frequency is greater than the output sampling frequency.  In such cases, if the
+input signals contain frequency components at or above half of the output
+sampling frequency, the input signals should be low-pass filtered (using, for
+example \fBfir\fR(1)) to remove these components before processing them with
+\fBxform\fR.  Conversely, if the output sampling frequency is substantially
+greater than the input sampling frequency, resampling noise introduced at
+frequencies in excess of half of the input sampling frequency can be removed by
+low-pass filtering the output signals.
 .PP
 Normally, the ADC resolution fields in the header files are ignored, and
 scaling is determined by the ratios of the gain fields.  An undefined (0)
diff -Naur wfdb-10.3.3/doc/wpg-src/Makefile wfdb-10.3.4/doc/wpg-src/Makefile
--- wfdb-10.3.3/doc/wpg-src/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/doc/wpg-src/Makefile	Sun Mar 30 14:43:53 2003
@@ -65,12 +65,12 @@
 # wpg.info' again.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -87,8 +87,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/doc/wug-src/Makefile wfdb-10.3.4/doc/wug-src/Makefile
--- wfdb-10.3.3/doc/wug-src/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/doc/wug-src/Makefile	Sun Mar 30 14:43:53 2003
@@ -55,12 +55,12 @@
 # PostScript	'make wug.ps'   (requires latex and dvips)
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -77,8 +77,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/examples/Makefile wfdb-10.3.4/examples/Makefile
--- wfdb-10.3.3/examples/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/examples/Makefile	Sun Mar 30 14:43:53 2003
@@ -34,12 +34,12 @@
 # `make clean' to remove them.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -56,8 +56,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/lib/Makefile wfdb-10.3.4/lib/Makefile
--- wfdb-10.3.3/lib/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/lib/Makefile	Sun Mar 30 14:43:53 2003
@@ -33,12 +33,12 @@
 # type `make slib'.
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -51,6 +51,14 @@
 
 # WAVEVERSION is the WAVE version number.
 WAVEVERSION = 6.6
+# _____________________________________________________________________________
+
+# Definitions generated by 'configure'
+
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
+SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
 # file: linux-slib.def		G. Moody	31 May 2000
diff -Naur wfdb-10.3.3/lib/wfdb.h0 wfdb-10.3.4/lib/wfdb.h0
--- wfdb-10.3.3/lib/wfdb.h0	Tue Mar  4 15:58:04 2003
+++ wfdb-10.3.4/lib/wfdb.h0	Sun Mar 30 14:35:18 2003
@@ -1,5 +1,5 @@
 /* file: wfdb.h		G. Moody	13 June 1983
-			Last revised:   4 March 2003	wfdblib 10.3.3
+			Last revised:   30 March 2003	wfdblib 10.3.4
 WFDB library type, constant, structure, and function interface definitions
 
 _______________________________________________________________________________
@@ -33,7 +33,7 @@
 /* WFDB library version. */
 #define WFDB_MAJOR   10
 #define WFDB_MINOR   3
-#define WFDB_RELEASE 3
+#define WFDB_RELEASE 4
 #define WFDB_NETFILES 1	/* if 1, library includes code for HTTP, FTP clients */
 
 /* Determine what type of compiler is being used. */
diff -Naur wfdb-10.3.3/psd/Makefile wfdb-10.3.4/psd/Makefile
--- wfdb-10.3.3/psd/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/psd/Makefile	Sun Mar 30 14:43:53 2003
@@ -32,12 +32,12 @@
 # directory).
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -54,8 +54,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/wave/Makefile wfdb-10.3.4/wave/Makefile
--- wfdb-10.3.3/wave/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/wave/Makefile	Sun Mar 30 14:43:53 2003
@@ -45,12 +45,12 @@
 # just type `make' (from within this directory).
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -67,8 +67,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________
 
diff -Naur wfdb-10.3.3/waverc/Makefile wfdb-10.3.4/waverc/Makefile
--- wfdb-10.3.3/waverc/Makefile	Wed Mar 19 17:33:37 2003
+++ wfdb-10.3.4/waverc/Makefile	Sun Mar 30 14:43:53 2003
@@ -25,12 +25,12 @@
 # please visit PhysioNet (http://www.physionet.org/).
 # _____________________________________________________________________________
 # file: version.def		G. Moody	24 May 2000
-#				Last revised:  19 March 2003
+#				Last revised:  30 March 2003
 # Each release of the WFDB Software Package is identified by a three-part
 # version number, defined here:
 MAJOR = 10
 MINOR = 3
-RELEASE = 3
+RELEASE = 4
 VERSION = $(MAJOR).$(MINOR).$(RELEASE)
 
 # RPMRELEASE can be incremented if changes are made between official
@@ -47,8 +47,9 @@
 
 # Definitions generated by 'configure'
 
-PACKAGE = wfdb-10.3.3
-LONGDATE = 19 March 2003
+PACKAGE = wfdb-10.3.4
+SRCDIR = /home/george/wfdb-10.3.4
+LONGDATE = 30 March 2003
 SHORTDATE = MARCH 2003
 # _____________________________________________________________________________